1.
Make the belt as long as possible by tilting the latch
2.
Put the restraint on the seat.
3.
Run the vehicle’s safety belt through
or
around the
restraint. The child restraint instructions
will
show
you
how.
plate and pulling it along the belt.
4.
Buckle the belt.
Make
sure the release button is
positioned
so
you would be able to unbuckle the
safety belt quickly if you ever had to.
5.
To
tighten the belt, pull its free end while you push
down
on
the child restraint.
If
you’re using
a
forward-facing child restraint, you may find it
helpful to use your knee to push
down
on the child
restraint as you tighten the belt.
1-45
To Next Page
Loading...
