Oldsmobile 1999 Aurora

yellowblue
1-3
Power Lumbar Control
The power lumbar controls are located on the driver’s
and passenger’s door panels.
The rear lumbar control adjusts upper lumbar support,
and the front control adjusts lower lumbar support.
Press the front of the switch to increase support. Press
the back of the switch to decrease support.
Memory Seat and Mirrors
The memory function
controls both the driver’s
seat cushion and outside
mirror positions. It does
not store the lumbar or
recline positions.
To set your memory seat cushion and mirrors:
1. Position the driver’s seat and both outside mirrors
where you want them. See “Mirrors” in the Index.
2. Press the SET button. You will hear one beep.
3. Within five seconds, press either the 1 or 2 button.
You will hear two beeps.