OLI High vision - Advanced Error Codes and Solutions; Torque Meter and Sensor Faults; Temperature-Related Errors

DESCRIPTION
INSTALLATION
USE
MAINTENANCE AND
ASSISTANCE
OLI eBike Systems | High Vision
studioimmagina.com 00_102020
33
TROUBLESHOOTING
GENERAL
INFORMATION
error problem solution
0105 Non-compliant torque meter signal.
The torque meter signal has a fault. Reduced
power operation.
Request assistance.
0106 Non-compliant torque meter offset. The
torque meter signal has a fault.
Request assistance.
0801 Motor rotation sensors fault. Request assistance.
0802 Pedal rotation sensors fault. Request assistance.
0804 Excessive drive temperature.
The temperature sensor inside the drive has
detected a temperature above the danger
threshold.
Shut down the system temporarily to allow the
components to cool.
If it occurs frequently, ask for assistance.
0805 Excessive motor temperature. The motor has
reached a temperature above the danger
threshold.
Shut down the system temporarily to allow the
components to cool.
If it occurs frequently, ask for assistance.
0806 Non-compliant peripheral bus voltage. Request assistance.
0808 Locked rotor. The motor failed to start due
to a mechanical lock or a problem with the
internal wiring of the power unit.
Request assistance.