DESCRIPTION
INSTALLATION
USE
MAINTENANCE AND
ASSISTANCE
OLI eBike Systems | High Vision
TROUBLESHOOTING
GENERAL
INFORMATION
error problem solution
0809 The battery voltage is higher than the
maximum allowed.
Possible battery defect, try alternative or new
battery.
0810 Non-compliant current sensor signal. Request assistance.
0811 The drive has detected an overcurrent. Request assistance.
1101 Communication problem between power unit
and HMI. Check that the wiring is intact and
connected correctly.
Check the cable connections by removing the
motor,
see the motor user manual
.
1102 A key on the keypad is stuck in a pushed
position.
Try moving the keys on the keypad.
If this does not resolve, please request
assistance.
studioimmagina.com 00_102020
34
To Next Page
Loading...
