ESP32-C6-EVB power supply and consumption:
ESP32-C6-EVB can be powered by 3 sources:
• USB-C connector;
• Power jack connector;
• EXT1.pin1 (+5V) note that this wire is connected to the 5V of the USB so when you power ESP32-
C6-EVB from EXT1.pin1 – you should not have USB cable attached at the same time!!!
The typical power consumption is under 1W. Current consumption of ESP32-C6-EVB is approximately
0.06A when powered by 12V DC (applied to the power jack).
10
To Next Page
Loading...
