INTRODUCTION
What is ESP32-C6-EVB?
ESP32-C6-EVB is a WIFI-enabled and Bluetooth-enabled development board that has also has free GPIOs,
analog and digital inputs and outputs on boxed connector and more.
ESP32-C6-EVB uses ESP32-C6, Espressif’s first Wi-Fi 6 (IEEE 802.11ax) module. It integrates 2.4 GHz
Wi-Fi 6, Bluetooth 5 (LE), and the 802.15.4 low-rate wireless personal area network (LR-WPAN).
ESP32-C6-EVB is perfect for stand alone usage but can also be attached to any existing hardware project to
augment it with with 2.4GHz Wi-Fi 6 and Bluetooth LE 5.3 capabilities.
ESP32-C6-EVB requires only a USB cable for programming and powering; the board is equipped with USB
type C connector, the type of cable used for charging most mobile phones.
ESP32-C6-EVB is an Open Source Hardware project, all CAD source files are available at our GitHub
repositories. Files are released under CERN Open Hardware License Version 2 – strongly reciprocal and
allows users to learn, study, edit, modify, manufacture, and sell same, or derivative products based on these
designs. The only requirements is to open source their work under the same licensee.
The software environment for code development is free. There are a number of different software
environments that can be used for the board.
Espressif chips and modules are very popular, with excellent chip documentation. The community around
ESP chips is huge. This greatly eases both hardware and software development.
ESP32-C6-EVB is RoHS, REACH, CE, and UKCA compliant.
3
To Next Page
Loading...