OLIMEX ESP32-C6-EVB - ESP32-C6-EVB Board Features

ESP32-C6-EVB board features
ESP32-C6-EVB is Open Source Hardware design with the following features:
• ESP32-C6-WROOM-1-N4 module with 32-bit RISC-V single-core microprocessor, up to 160 MHz,
Flash: 4MB, ROM: 320 KB, HP SRAM: 512 KB, LP SRAM: 16 KB
• USB-C connector for powering, programming, and JTAG debugging
• Power jack for optional external power (8-50)V DC
• Four Relays: 10A/240VAC
• Four opto-isolated inputs for DC voltage up to 30VDC
• Two UEXT connectors (0.1" step one and JST one)
• Extension GPIO connector
• Reset button
• User button
• Wide range of power supply: 8-50VDC
• Programming connector suitable for ESP-PROG
• Four mount holes
• Four rubber pads included
4