Olimpia splendid Unico Air - Routine Maintenance; Routine Maintenance Overview; Cleaning the Air Filter

2-6
ROUTINE
MAINTENANCE
The air
conditioner that
you
have
purchased
has
been designed
to reduce routine
maintenance
operations
to a minimum.
These
operations involve
solely
the cleaning operations
outlined below:
-
Cleaning or washing of
the ambient air filter
every
2
weeks or every
time the relative
red LED
lights up
(this
can be done
by the
user,
see user manual).
-
Cleaning
of the condensing
battery and cleaning
of the condensate
management
system. These
operations
must be
carried
out by
skilled technicians
on a regular basis that will
depend on the
place
of installation
and
intensity
of use.
Depending
on the
quantity
of dirt, the unit can
be cleaned dry
(by
using a battery
compressor
and bowl and
cleaning the fins with
a soft brush
taking
care not to deform
them) or more thoroughly
using dedicated
detergents.
Before
you
leave
the site of installation
you
should
gather
up
all
packing
material
and
use a damp cloth to remove
any
traces of
dust
that
may
have deposited
on the machine during assembly
(fig.
21).
These
operations, though
certainly
not
essential, have a beneficial
effect as
they enhance
the
professional
image
of the installer
in the
eyes of the client.
To
prevent
unnecessary calls
by the user, before
you
leave the site
of
installation
it is
also a
good
idea to:
-
Explain
the contents of
the
lnstruction
Manual to the user.
-
Show the user how to clean the filter.
Cleaning the
air
filter
2.6.1
n
^/l\
/-\
--
oPERATIONTOBEPERFORMEDWHENTHEMACHINEISSWTTCHEDOFFANDTHEPOWERSUppLyTSDTSCONNECTED.
/L\
4l
To ensure effective internal
air filtration and
satisfactory operation of
your
air conditioner,
the air filter has to
be cleaned
periodically.
The
air filter is at the
top of the unit.
Removing the filter:
-
unhook and manually remove
the air intake filter acting
as
indicated
in fig.22
-
remove
the two supplementary filters
from the filter unit
-
wash
and dry all the filters
-
refit the filter unit
To deactivate LED A
(if
on), after having
powered
and started the appliance,
press
the micro key
positioned
on the signal console
(fig.
19 ref. H) with
a
pointy
object for
a brief
instant.
By doing so, the
signal related
to the filter cleaning requirement
is reset.
33
rco AtR