24
Item
Specification
CKX31 CKX41
7. UIS2 Objectives
(UIS series
objectives can
also be used.)
Brightfield
PlanCN4X N.A. 0.10, W.D. 18.5 mm, resolution 3.36 μm
PlanCN10X N.A. 0.25, W.D. 10.5 mm, resolution 1.30 μm
PlanCN20X N.A. 0.40, W.D. 1.2 mm, resolution 0.84 μm
PlanCN40X N.A. 0.65, W.D. 0.6 mm, resolution 0.54 μm
PlanCN60X N.A. 0.80, W.D. 0.2 mm, resolution 0.42 μm
PlanCN100XO N.A. 1.25, W.D. 0.13 mm, resolution 0.27 μm
LUCPlanFLN20X N.A. 0.45, W.D. 6.6-7.8 mm, resolution 0.75 μm
LUCPlanFLN40X N.A. 0.60, W.D. 2.7-4.0 mm, resolution 0.56 μm
LUCPlanFLN60X N.A. 0.70, W.D. 1.5-2.2 mm, resolution 0.48 μm
Phase contrast
(PhP is for IX2-SLP
only)
UPlanFLN4XPh (PhP)
N.A. 0.13, W.D. 17.0 (16.4) mm, resolution 2.60 μm
CAchN10X (PhP) N.A. 0.25, W.D. 8.8 mm, resolution 1.30 μm
CPlanN10XPh N.A. 0.25, W.D. 10.0 mm, resolution 1.30 μm
PlanN10XPh N.A. 0.25, W.D. 10.6 mm, resolution 1.30 μm
LCAchN10XPh (PhP) N.A. 0.40, W.D. 3.2 mm, resolution 0.84 μm
LUCPlanFLN20XPh N.A. 0.45, W.D. 6.6-7.8 mm, resolution 0.75 μm
LCAchN40XPh (PhP) N.A. 0.55, W.D. 2.2 mm, resolution 0.61 μm
8. Stage Dimensions: 160(W) x 250(D) mm
Stage extension plate dimensions: 70(W) x 180(D) mm
Provided with 35 mm petri dish holder (CKX31 only)
9. Mechanical stage
CK40-MVR
Traverse area: 120(X) x 78(Y) mm
Coaxial low drive control knobs on right or left side of plain stage. Provided with
three culture vessel holders.
10. Condenser Ultralong working distance condenser, N.A. 0.3, W.D. 72 mm. Detachable.
11. Dimensions & weight 236(W) x 469(D) x 476(H) mm, 8 kg 236(W) x 371(D) x 476(H) mm, 8.8 kg
12. Operating environment
· Indoor use.
· Altitude: Max. 2000 m
· Ambient temperature: 5° to 40°C (41° to 104°F)
· Maximum relative humidity: 80% for temperatures up to 31°C (88°F), decreasing
linearly through 70% at 34°C (93°F), 60% at 37°C (99°F), to 50% relative humidity
at 40°C (104°F).
· Supply voltage fluctuations; Not to exceed ±10% of the normal voltage.
· Pollution degree: 2 (in accordance with IEC60664)
· Installation/Overvoltage category: II (in accordance with IEC60664)
To Next Page
Loading...