CKX41/CKX31
CONTENTS
IMPORTANT — Be sure to read this section for safe use of the equipment. —
1-3
1 NOMENCLATURE
2 CONTROLS
3 SUMMARY OF OBSERVATION PROCEDURE
4 USING THE CONTROLS
4-1 Microscope Frame ............................................................................................................................................................................... 9
1 Turning On the Light Source 2 Adjusting the Brightness
3 Adjusting the Tension of the Coarse Adjustment Knob
4-2 Stage..................................................................................................................................................................................................................... 10
1 Placing the Specimen 2 Moving the Specimen
4-3 Observation Tube ....................................................................................................................................................................... 11- 14
PROPER SELECTION OF THE POWER SUPPLY CORD........................................................ 30-31
4-5
6-7
8
9-15
1 Adjusting the Interpupillary Distance 2 Adjusting the Diopter
3 Using the Eye Shades 4 Using Eyepiece Micrometer Disks
5
Selecting the Light Path (U-TR30-2 Only)
6 Adjusting the Tilt
4-4 Illumination Column........................................................................................................................................................................ 15
1 Using the Filters 2 Using the Aperture Iris Diaphragm
3 Removing the Condenser Lens
4-5 Objective Correction Collars ............................................................................................................................................. 16
1 Correction Collar
5 PHASE CONTRAST OBSERVATION
6 PHOTOMICROGRAPHY & TV OBSERVATION
7 TROUBLESHOOTING GUIDE
8 SPECIFICATIONS
9 ASSEMBLY
— See this section for the replacement of the light bulb. —
17- 19
20
21-22
23-24
25-29
LAMP SOCKET INSPECTION SHEET
10
32
To Next Page
Loading...