EasyManua.ls Logo

Olitech EasyMate 2 - Memory Card Installation

Olitech EasyMate 2
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
easymate2videos or call Olitech on 03
9755 8885 if required.
Please note:
Before fixing the phones back cover in
place:
1. insert the SD card (optional);
2. attach lanyard (optional); and
3. install battery.
Instructions for these processes are
detailed below.
SD card/Memory card (optional)
An SD card/memory card can be inserted
into the phone to facilitate additional
memory. The maximum capacity of the SD
card should be no greater than 16GB.
Inserting the SD/Memory card:
When the back cover and battery are
removed, the SD card slot can be seen in
the top right corner of the battery recess.
The SD card slot is a sliding hinge style slot
(different style of slot to the SIM slot). To
insert the SD card:
1. Gently slide silver clip up. This unlocks
the silver clip from its fixed position.
2. Move silver clip to a vertical position

Other manuals for Olitech EasyMate 2