be heard as the back cover and main
phone unit lock together.
Charging the battery
EasyMate 2 charging components include:
• wall plug (connects to power point)
• micro USB charging/data cable
• charging cradle
Only use the Olitech battery and charging
components with this phone. Before using
the phone for the first time please charge
the battery for at least 4 hours. When
charging, do not remove the battery from
the phone. The phone/charger may be
warm during charging. This is normal.
Important information: If the battery
capacity is exhausted and the phone
powers off:
1. When connected to a charger, it may
take several minutes for visual
indicators relating to charging to appear
on the phone; and
2. When the phone has sufficient charge,
it must be manually powered back on
by pressing and holding the power key
for 5 seconds. The phone will not
automatically power back on.
To Next Page
Loading...
