Additional Modules
7 - 4 Wireless LAN Module
7
Wireless LAN Module
Make sure that the Wireless LAN module is on b
efore installing the driver (the
WLAN module’s default power state is off).
Use the Fn + F11 key combination (see “Function/Hot Key Indicators” on
Chapter 1) to toggle power to the Wireless LAN module. Make sure you
install the drivers in the order indicated in Table 4 - 1, on page 4 - 2.
A
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission
devices aboard aircraft is
usually prohibited. Make
sure the module(s) are
OFF if you are using the
computer aboard air-
craft.
Use the Fn + F11 key
combination to toggle
power to the WLAN
module, and check the
indicator to see if the
module is powered on or
not (see Table 1 - 2, on
page 1 - 9/ Table 1 - 3,
on page 1 - 11).
To Next Page