Gu
8
D The replay memory can be deleted by one of the following
procedures.
D By pressing the key.
D By initialising modes and settings by pressing the
(or ) key.
D By switching from one calculation mode to another.
D By switching the calculator off.
Error location
D Pressing the or key after an error has occurred causes the
calculation to be displayed and the cursor is positioned at the location
of the error.
Multiple statements
A multiple statement is an expression which is comprised of two or more
smaller expressions linked by a colon (:).
Example: Add 2 + 3 and the result multiplied by 4.
2
3 : 4
Exponential display formats
The calculator can display up to 10 digits. Larger values are automatically
displayed using exponential notation. In the case of decimal values, it is
possible to select between two formats which define at which point the
exponential notation is used.
D In order to change the exponential display format, press the key
repeatedly until the exponential display format setup screen
illustrated below appears.
Fix Sci Norm
123
D Press the key. Press on the format selection screen
displayed or
to select Norm 1 or Norm 2.
D Norm 1
On selecting Norm 1, exponential notation is automatically used for
integer values exceeding 10 digits and for decimal values with more
than two decimal places.
D Norm 2
On selecting Norm 2, exponential notation is automatically used for
integer values exceeding 10 digits and for decimal values with more
than nine decimal places.
2+3
5. DISP
Ans x 4
20.
To Next Page
Loading...
Need help?
General
