Olympia TREK - Page 41

G
41
3.4.4 Putting a Call on Hold
You can select whether to put the call in progress on hold. Putting
a call on hold means putting it into holding mode.
bringen. The caller is put on hold enabling you to call someone
else.Therstcallercannothearthiscall.
1 When a call is in progress, tap on the ┣Hold┫ button.
▸ The caller is put on hold.
2 Tap on the ┣Hold┫ button again to resume the conversation with
the caller previously put on hold.
3.4.5 Conference Facility
You can set up a conference call, meaning communicating with at
least two other parties at the same time.
1 When a call is in progress, tap on the ┣Add call┫ button and dial
the phone number of another person.
2 Tap on the Call┫ button.
▸ The new person is called.
Duringthistime,thecallwiththerstcallerishelduntilthesecond
person has taken the call and you start the conference.
3 Wait until the new person has taken the call and then tap on
the ┣Merge┫ button.
▸ The conference call facility is activated and you can talk to
both parties (or more).
4 Tap on the ┣Hangup all┫ button.
▸ The conference call is ended.