6
28. When finished:
- Rotate the condenser turret (23) until the BF (brightfield) mark is visible.
- Lower the stage by turning the focus knob (10) towards you and remove the slide
with your specimen from the stage (7).
- Turn the nosepiece (12) back until the 10x objective for brightfield imaging is into
place.
- Turn the light intensity down using the brightness adjustment knob (3).
- Turn off the halogen light switch (1) to “0” (OFF).
- Cover the microscope.
- Leave the room CLEAN and TIDY!
This Manual: http://www.manuallib.com/file/2605418
To Next Page
Loading...
