Need help?Do you have a question about the Olympus BX50 and is the answer not in the manual?
General| Type | Upright microscope |
|---|---|
| Power Supply | AC 100-240V, 50/60Hz |
| Optical system | UIS (Universal Infinity System) |
| Stage | Rectangular stage with a rotating mechanism |
| Focus | Coarse and fine focus |
| Observation Method | Brightfield, darkfield, phase contrast, fluorescence |
| Magnification | Depends on objectives used |
| Nosepiece | Revolving nosepiece for multiple objectives |
| Condenser | Abbe condenser with aperture diaphragm |
| Diopter Adjustment | Available on eyepieces |
Diagram illustrating the assembly of various microscope modules.
Step-by-step instructions for assembling the microscope components.
Procedures for attaching the stage, specimen holder, and condenser.
Steps for mounting key optical and mechanical components of the microscope.
Instructions for connecting power and replacing fuses for the microscope.
Operation of voltage indicator and light preset button on the microscope base.
Procedures for placing specimen slides and adjusting the stage.
Adjusting interpupillary distance, diopter, and using eye shades.
Using micrometers, selecting light path, and adjusting observation tube tilt.
Centering the condenser and adjusting the field iris diaphragm.
Adjusting coarse/fine knobs, tension, and stopper.
Using immersion objectives and setting up for photomicrography.
Common problems and solutions related to the microscope's optical system.
Troubleshooting common electrical problems with the microscope.
Solutions for problems with coarse/fine adjustment knobs.
Troubleshooting common problems with the observation tube.
Solutions for common problems encountered with the microscope stage.
To Next Page
