104
E
ONE-FRAME ERASE
You can delete pictures you do not want.
1 Display the picture you want to delete. In the Index-Play
mode, place the indicator (the red frame number) on the
picture you want to delete.
2 Press the Erase button. The display above appears.
3 Press the OK button to erase the selected picture.
● “ERASING” on a blue screen appears while erasing. The
previous picture appears when it is complete.
● See page 112 for performing Erase All.
◆ Never open the Card compartment cover, eject the
card, remove the batteries, or disconnect the AC
adaptor while erasing pictures. It may destroy the
data in the card.
◆ Do not press the Erase mode button while an image
is being loaded onto the LCD.
Caution:
◆ When the write-protect adhesive seal is placed on
the card or the picture is protected from other
cameras or PCs, the Card error mark on the control
panel blinks, and One-Frame erase is not engaged.
◆ The erasing time varies depending on the condition
of the SmartMedia.
Note:
To Next Page
Loading...
