160
E
NOTES ON DISPLAY AND BACKLIGHT
The fluorescent lamps used in the Control Panel and LCD
monitor have a limited service life. If they begin to darken or
flicker, contact your nearest Olympus service center. (There
is a service fee if out of warranty.)
In cold conditions, the display backlight may be slow to
come on or may change colour suddenly. To avoid this,
keep the camera warm when using in cold temperatures.
Backlight performance will return to normal under normal
temperature conditions.
When the colour LCD monitor shows different pictures,
some pixels may not change colour and remain on or off.
This phenomenon may be due to a malfunction in some
circuits, but is considered to be within the normal operating
tolerances of the LCD monitor. In addition, the brightness of
the colour LCD monitor may vary from picture to picture.
This is a normal operating characteristic of this product.
To Next Page
Loading...
