57
Zoom
3
Shooting basics
6 Press to select ON, and
press .
• Press again to exit the menu and
return to the shooting status.
7 Pull the zoom lever toward .
• The white area of the zoom indicator
indicates the optical zoom. If the digital
zoom is set to ON, a red area appears on
the zoom indicator. The digital zoom is
enabled when you reach the limit of the
optical zoom and then pull the zoom lever
toward T.
8 Take the picture.
• Pictures taken with the digital zoom may appear grainy.
• Camera movement is likely to occur at higher magnifications. Stabilize
the camera with a tripod, etc. to avoid camera movement.
• Turning the monitor off cancels the digital zoom, and the camera takes
a picture at the specified optical zoom magnification. It will be
automatically enabled the next time you turn the monitor on.
• You cannot use the digital zoom in Self-Portrait mode.
The cursor moves up and
down on the zoom
indicator according to the
zoom magnification.
Note
To Next Page
Loading...
