28 En
En
Fill-in flash ( )
The flash fires regardless of the available light.
Flash off ( )
The flash does not fire even in low light conditions.
J USING THE SELF-TIMER
Fix the camera securely on a tripod on set it on a level surface for self-timer
shooting. This function is useful for taking pictures where you want to be
included in the photograph.
1 Open the lens barrier fully.
• The camera turns on in the shooting mode.
2 Press ( ).
• The monitor turns on and the current self-timer setting is displayed.
3 Press to switch the self-timer mode on and off.
• The setting changes between ON and OFF each time is
pressed. When the self- timer mode is selected, is displayed on
the monitor.
4 Take the picture.
• The self-timer lamp lights up for approximately 10 seconds, and starts
blinking. After blinking for approximately 2 seconds with a beep sound,
the picture is taken.
• The self-timer mode is automatically canceled after one shot.
X139_Basic.book 28 ページ ２００３年１月２０日 月曜日 午前９時３９分
To Next Page
Loading...
