34 En
En
J CARD SETUP
–
FORMATTING CARD
This function lets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format them with this camera.
All existing data, including protected pictures, are erased when the card
is formatted. Make sure that you transfer important data to a PC before
formatting a used card.
1 In the top menu, select MODE MENU → CARD → CARD
SETUP, and press .
• Shooting mode
The FORMAT screen is displayed.
• Playback mode
The CARD SETUP screen is displayed.
2 If the FORMAT screen is displayed, press to
select YES.
If the CARD SETUP screen is displayed, press to
select FORMAT, and press .
When the FORMAT screen appears, press to select
YES.
3 Press .
• The BUSY bar is displayed and the card is formatted.
X139_Basic.book 34 ページ ２００３年１月２０日 月曜日 午前９時３９分
To Next Page
Loading...
