36
PLAYBACK (Cont.)
Protect (Protecting Images Against Accidental
Erasure)
1
Display the picture you want to protect by using the arrow pad.
2
Press . The picture is now protected.
● To cancel protection, press again.
Single-Frame Erase
1
Select a picture you wish to erase by using the arrow pad.
● If the picture is protected, cancel the protection.
2
Press the (erase) button. The ERASE screen is displayed.
3
Press Ñ to select YES.
4
Press to erase the picture.
● To cancel erasing, select NO in step 3 and press , or press the button
again.
All-Frame Erase
This function erases all still pictures and movies in the card, except protected
ones.
1
In the top menu, select MODE MENU T CARD T CARD SETUP T
ALL ERASE.
2
Press . The ALL ERASE screen is displayed.
3
Press Ñ to select YES.
4
Press to start erasing.
● A bar is displayed to show the progress of erasing.
● To cancel erasing, select NO in step 3 and press .
● It is not possible to erase protected pictures or pictures stored on a card
that has a write-protect seal.
● Once erased, pictures cannot be restored.
1 C-40ZBasic-E1 01.10.11 9:39 AM Page 36
To Next Page
Loading...
