22
En
Taking still pictures
The following section describes how to take pictures using the monitor.
For details regarding the display on the monitor, please refer to the
Advanced manual (CD-ROM).
Slide the power switch to ON.
When power is turned on, the lens
barrier opens, the lens extends, and
the monitor turns on automatically.
If the lens does not extend even
when the lens barrier is opened,
there is a possibility that the power
switch is not fully set to the ON
position. Slide the power switch to
the ON position correctly.
P
a
2272*1704
2020
HQ
(
#
e
o
AF target mark
Green lamp
Flash standby/
flash charging
Card access mark
Power switch
Monitor
000e_kihonhen.book Page 22 Tuesday, September 14, 2004 11:12 AM
To Next Page
Loading...
