103
Record mode
Adjusting the image quality and exposure
6
3:2 Resolution
The image aspect ratio is normally 4:3. If the
aspect ratio is changed to 3:2, the image can be
printed at a photo lab without losing the image
borders. When is activated, the resolution
is 2288 × 1520 pixels. resolution can be
selected in the TIFF, SHQ or HQ mode.
resolution is not available in h or n mode.
ENLARGE SIZE
When ENLARGE SIZE is selected, the actual 4 million pixels used by this
camera can be increased to the equivalent of approx. 8 million pixels (3200 ×
2400). This allows you to make quality prints in larger sizes, such as A3
(297 mm × 420 mm/11.7" × 16.5"). However, file sizes also become larger.
ENLARGE SIZE can be selected in the SHQ or HQ mode. ENLARGE SIZE
is not available in the h or n mode.
• If the SHQ record mode is set to ENLARGE SIZE, sequential
shooting modes (j, i, k, BKT) are not available.
F2.8
2288 1520
HQ
Monitor display
when is set
3:2
3:2
3:2
3:2
Note
To Next Page
Loading...
