63
Flash
4
External flash (optional)
Using the external flash
Various types of flash shooting are possible with the FL-20 or FL-40 external
flash.
If an external flash is used, the flash mode and exposure compensation will
be detected automatically by the camera like the built-in flash.
You cannot use the built-in flash and the external flash together.
1
Slide the shoe cover off in the
direction of the arrow and attach
the external flash.
• For instructions on how to attach the
flash, refer to the manual for the
external flash.
• Keep the shoe cover in a safe place to
prevent it getting lost, and replace it on
the camera when you have finished using the external flash.
2
Turn on the external flash.
• When using the FL-20, set the mode dial to
TTL-AUTO.
• When using the FL-40, the external flash
begins communicating with the camera and
automatically switches to TTL-AUTO.
During communication, TTL-AUTO is
displayed.
• Be sure to attach the flash to the camera
before turning the flash on.
Mode dial
Shoe cover
To Next Page
Loading...
