128
7
Playback
Playback on a TV
Use the AV cable provided with the camera to play back recorded images on
your TV. You can play back both still pictures and movies on your TV.
1
Make sure that the TV and camera are turned off. Connect
the A/V OUT jack on the camera to the Video input
terminal on the TV using the AV cable.
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction
manual.
3
Set the mode dial to
q
and turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow functions can also
be used on a TV screen.
TIPS
• You are recommended to use the optional AC adapter when using
the camera with a TV.
• Make sure that the camera’s video output signal type is the same as
the TV’s video signal type. g“VIDEO OUT - Video output
selection” (P.162)
• The camera’s monitor or viewfinder turns off automatically when the
AV cable is connected to the camera.
• Be sure to use the AV cable provided to connect the camera to the
TV.
• The picture may appear off-center on the TV screen.
Mode dial
Connect to the TV’s video input (yellow)
and audio input (white) terminals.
AV cable
A/V OUT jack (MONO)
Note
To Next Page
Loading...
