80
Metering
5
Advanced shooting
MULTI METERING
1
When using the camera in the
p
mode, multi-metering is
not available in the
M
mode. Set to
any mode except
M
.
g“A/S/M mode” (P.67)
• If a function other than AE lock is
registered on x, set AE lock to the
button.
g“Setting the custom button” (P.140)
2
Press
(
repeatedly to set
n
.
g“Spot metering” (P.79)
3
In the top menu, select MODE MENU
Æ
CAMERA
Æ
MULTI
METERING
Æ
ON, and press
e
.
g“How to use the menus” (P.33)
•Press e again to exit the menu.
4
Position the AF target mark on the
area you want to meter and press
x
. The brightness is metered
at up to 8 different points.
• Multi-metering bar appears.
• Brightness meter readings are ignored
after the 9th reading.
• To perform metering again, press
x for more than 1 second to display C. Press x again
to cancel the metering values.
Mode dial
Arrow pad
OK button
x
AEL/Custom button
( Macro/Spot button
F2.8