125
Editing movies
Playback
7
4
Use the arrow pad to select the first
frame of the index and press
e
.
a: Jumps to the first frame of the movie.
c: Jumps to the last frame of the movie.
d : Displays the next frame. The movie can
be played continuously by holding the
button down.
b : Displays the previous frame.
The movie can be played continuously in reverse by holding the
button down.
5
As in Step 4, use the arrow pad to
select the last frame of the index
and press
e
.
6
Press
ac
to select OK, then
press
e
.
• The 9 frames extracted from the movie
appear as an index display, then the
camera returns to the playback mode. The
index is stored as a new picture.
• If you want to select different frames,
select RESET and press e and repeat
the procedure from Step 4.
• To quit the editing function, select CANCEL and press e.
TIPS
• The index is stored as a still picture in a different record mode from
the original movie.
Record mode
when the movie was shot
Record mode
when stored as an index
HQ SQ2 (1024 × 768 pixels: HIGH)
SQ SQ2 (640 × 480 pixels: HIGH)
OK
OK
GO
SELECt
OK
RESEt
INDEX
CANCEL
To Next Page
Loading...
