10 En
En
J ATTACHING THE STRAP
J CHARGING THE BATTERY
This camera uses one BLM-1 lithium ion battery. Other batteries cannot be
used.
The battery is not fully charged at the time of purchase. Before using the
camera, charge the battery using the BCM-2 charger. For more details, read the
instructions provided with the charger.
1 Plug the power cord into the charger.
2 Plug the other end of the power cord into a
household electrical outlet.
3 Remove the protection cap from the battery.
Place the battery on the charger, making
sure that it is correctly oriented as shown in
the illustration.
• Align the battery with the guideline on the charger ( ), and insert the battery
into the charger as far as it goes.
1
345
2
AC wall outlet
basic_e_d4155_6.fm Page 10 Monday, December 8, 2003 10:02 AM
To Next Page
Loading...
