Olympus CAMEDIA C480 Zoom - Checking the Image Processing Function (PIXEL MAPPING); Adjusting the Brightness of the Monitor

74
6
Settings
Checking the image processing function
(PIXEL MAPPING)
The pixel mapping feature allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function frequently.
Approximately once a year is recommended. Wait at least one minute after taking
or viewing pictures to allow for proper performance of the pixel mapping function.
Top menu [MODE MENU] [SETUP] [PIXEL MAPPING]
g“How to use the menus” (P. 16)
1 When [START] is displayed,
press Z.
• The [BUSY] bar is displayed during
pixel mapping. When pixel mapping is
finished, the screen returns to the
mode menu.
This function lets you adjust the brightness of the monitor to make it easier
to see the image.
Top menu [MODE MENU] [SETUP] [s]
g“How to use the menus” (P. 16)
• In : Top menu [SETUP] [s]
1 Adjust the brightness while
looking in the monitor, and when
you have set the desired level,
press Z.
•Pressing a brightens the monitor, and
pressing c darkens it.
Note
• If you turn the camera off during pixel mapping, start again from Step 1.
START
s
PIXEL MAPPING
X
PIC
CAM
MEM
SETUP
Adjusting the brightness of the monitor
s
SELECT
SELECT
GO
GO
OK
OK
SELECT GO
OK