97
8
Connecting the camera to a computer
Connecting the camera to a computer
Use the USB cable provided with the camera to connect the camera to
your computer.
1 Make sure the camera is turned
off.
• The monitor is off.
• The lens is retracted.
2 Plug the USB cable into the USB port on the computer.
• Refer to your computer’s instruction manual to locate the position of the
USB port.
3 Plug the other end of the USB
cable into the camera’s USB
connector.
• The camera turns on automatically.
• The monitor turns on and the selection
screen for the USB connection is
displayed.
4 Select [PC], and press Z.
5 The camera is recognized by the
computer.
• Windows 98SE/Me/2000
When you connect the camera to your
computer for the first time, the computer
attempts to recognize the camera. Click
“OK” to exit the message that is displayed.
The camera is recognized as a “Removable Disk”.
Monitor
USB connector
Connector cover
SELECT GO
OK
PRINT
EXIT
USB
P C
To Next Page
Loading...
