106
4
Press and hold the white balance
mode button
, then turn the
main dial or sub dial to zero for the
color temperature setting.
The color temperature setting is displayed
at the shutter speed position in the control
panel.
5
Point and shoot the picture.
Control panel
Quick reference (one touch) white balance setting for commercially
available external flash
You can use the quick reference (one touch) white balance function for your external flash. Adjust
the guide number and aperture value of the external flash before shooting.
Note
The white balance setting mode using the quick reference (one touch) white balance is stored in
memory of the camera as one of the preset white balance values. The value remains in memory
even if the camera turns off. However, if you do the quick reference (one touch) white balance
setting again, the value in memory is replaced with the new value.
Using Quick Reference (One Touch) White Balance (continued)
To Next Page
Loading...
