38
If You Cannot Take a Picture
Message displayed in the viewfinder?
If you see Card 0 blinking in the viewfinder
The memory card is full and you cannot continue taking
pictures with the card. In order to continue shooting with the
card, you will have to remove some pictures from the card.
• Deleting Single Pictures (➞ 49)
• Transferring Pictures to a Computer (➞ 173)
• Deleting All Images (➞ 156)
If you see Card blinking in the viewfinder, refer to the error message summary.
Appendix 3: Camera Error Messages (➞ 199)
Memory gauge blinking?
The camera is storing the pictures from the buffer onto a card. Wait until the memory gauge stops
blinking. The amount of time required for storing pictures varies depending on the condition of the
card and the record mode.
Viewfinder
Control panel
Memory gauge
Control panel
To Next Page
Loading...
