113
7
Selecting Sharpness
Three settings are available for adjusting sharpness: HARD, NORMAL, and SOFT. HARD
sharpens the contrast at edges to maximize the clarity of the image.
NORMAL The default when you purchase the camera. Defines borders to achieve
best focus for printing the image.
HARD Greatly enhances and sharpens edges.
SOFT Softens edges slightly and is ideal for images that you intend to process
with a computer graphics software application.
1
Press the menu button .
The menu is displayed on the monitor.
2
On the arrow pad, press or
to move the green highlight to the
sharp option mark
.
3
On the arrow pad, press to
move the green highlight to HARD,
NORMAL, or SOFT.
4
Press the button to select the
setting.
The green highlight returns to the sharp
option mark .
(To cancel the setting, press the menu
button instead of the button.)
Press the button again to close the
menu.
The mark is displayed in the control
panel when a setting other than NORMAL
is selected.
Note
• Selecting HARD could cause the image to
appear rough.
2
3
4
1
Control panel
To Next Page
Loading...
