158
Mode dial set to P, A, S, or M
5
3
4
2
ON
OFF
6
6
7
7
Formatting a Memory Card
Memory cards which have been formatted on a computer or other external device, or
cards of another manufacturer, may have a different format. Such cards should be
formatted before they are used with the camera. Formatting a used card deletes all the
images stored on the card, so you should frequently copy images to a computer where
they can be stored safely. A SmartMedia card protected by an attached protect seal
cannot be formatted.
1
Insert the card that you want to
format into the camera. (➞ 24)
2
Check the control panel display
and make sure that the mark for
the card that you want to format,
SmartMedia
or CompactFlash/
Microdrive
, is displayed.
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
3
Set the mode dial to P, A, S, M, or
to playback
.
4
Press the menu button .
The menu opens in the monitor.
5
If you set the mode dial to
playback
, on the arrow pad
press
or to move the green
highlight to card setup
.
6
On the arrow pad, press to
move the green highlight to the
format mark
.
7
Press the button.
FORMAT? is displayed.
Mode dial set to playback
To Next Page
Loading...
