166
Selecting All Pictures on a Card for
Printing
You can select all pictures stored on a card to print one by one.
1
Insert the memory card that
contains the pictures that you want
to select for printing. (➞ 24)
2
Check the control panel display
and make sure that the mark for
the source card, SmartMedia or
CompactFlash/Microdrive
, is
displayed.
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
3
Set the mode dial to print reserve
.
The last picture taken is displayed in the
monitor.
4
Press the menu button .
The menu opens in the monitor.
5
On the arrow pad, press to
move the green highlight to the
SELECT ALL.
6
Press the button.
SELECT ALL? is displayed.
Memory card
with pictures to
be selected for
printing
2
4
3
ON
OFF
5
6
To Next Page
Loading...
