111
7
Customizing the Record Mode
You can change the resolution and compression combination corresponding to each record mode.
The resolution and compression settings can be selected as shown in the table below.
1
Press the menu button .
The menu is displayed on the monitor.
2
On the arrow pad, press or
to move the green highlight to the
quality mark
.
3
On the arrow pad, press to
move the green highlight to the
record mode.
4
On the arrow pad, press or
until the desired record mode is
displayed.
5
On the arrow pad, press to
move the green highlight to the
resolution.
6
On the arrow pad, press or
to select the desired resolution
setting.
If you do not want to change the
compression setting, go to Step 9.
7
On the arrow pad, press to
move the green highlight to the
compression setting.
8
On the arrow pad, press or
to select the compression setting.
6
5
4
2
3
CompressionResolution
2560 × 1920 pixels (FULL) 1:1 (not compressed)
unchangeable unchangeable
2560 × 1920 pixels (FULL) Approx. 1:2.7
1792 × 1344 pixels (HALF) Approx. 1:4
1280 × 960 pixels (SXGA) Approx. 1:8
1024 × 768 pixels (XGA)
640 × 480 pixels (VGA)
Record
mode
TIFF
SHQ
HQ
SQ
7
8
To Next Page
Loading...
