9
Important Parts and Names
Main dial and sub dial
For your convenience, the main dial and sub dial can be used in the same way in most cases to
select the camera settings. However, when the mode dial is set to M (manual mode), the main dial
is used to set the aperture value and the sub dial is used to select the shutter speed.
* Press and hold, then turn
the main dial or sub dial
to operate.
Flash button
➝ 42, 93
Built-in flash ➝ 42, 89
Metering mode button* ➝ 83
Remote cable
jack➝ 124
Flash mode button* ➝ 90
Hot shoe
➝ 97, 99
Record mode button* ➝ 108
Control panel 11
Sub dial ➝
Mode dial ➝ 70
White balance mode
button* ➝ 102
Power switch ➝ 28
AE lock button ➝ 85
Card access lamp
➝ 17, 37
Light button ➝ 28
Main dial ➝
SM/CF memory
card button* ➝ 129
Card cover lock
➝ 25
Viewfinder 12
Monitor 10, 12
Eyepiece shutter lever ➝ 35
Diopter adjustment ring ➝ 34
DC IN jack cap
DC IN jack ➝ 21
Connector cover
Video OUT jack ➝ 149
USB connector ➝ 176
Drive button*
➝ 120, 121, 122
Strap eyelet ➝ 15
Focus mode switch➝ 64, 68
Flash synchro socket
(External flash connector) ➝ 99
Macro button*
➝ 40
Manual focus
ring ➝ 68
Zoom ring
➝ 40
Exposure
compensation
button* ➝ 84
See “Main dial
and Sub dial” below.
See “Main dial
and Sub dial” below.
Card cover
➝ 25
To Next Page
Loading...
