127
8
7
Select the hour or minute setting
that you want to change, and then
press or to raise or lower the
number.
• Hours
With the setting you want displayed,
press the button to shift to the
Minutes setting.
• Minutes
With the setting you want displayed,
press the button.
You will be prompted to start time lapse
photography (YES/NO).
8
On the arrow pad, press to
move the green highlight to YES
and then press the button.
The camera starts taking pictures at the
selected time interval. The time interval
setting and the number of shots taken are
displayed in the monitor for about 5
seconds. Before the next picture is taken,
the camera enters the sleep mode and all
the displays are switched off to conserve
battery power. To cancel at any time,
switch the camera off.
Hours
Minutes
7
8
Time-lapse photography mode display
Switch the camera
off to cancel
Time interval
Number of
shots taken
To Next Page
Loading...
