79
5
4
Press the button.
The IS mode is selected, and the green
highlight moves to .
(To cancel the setting, press the menu
button instead of the button.)
Press the button again to close the
menu.
5
Check the record mode indicator in
the control panel.
The record mode may have been changed.
Note
• The maximum number of sequential shots which can be taken using the burst mode varies
depending on the record mode. In the IS mode, when the record mode is set to:
– SHQ, HQ, SQ, or TIFF, up to four pictures can be taken,
– RAW, up to three pictures can be taken.
• In the IS mode, when the record mode is;
– SHQ, HQ, SQ, or TIFF, up to four memory gauge bars are lit, and
– RAW, up to three memory gauge bars are lit.
(One memory gauge bar indicates one shot image in the buffer.)
If the memory gauge is blinking, you cannot continue shooting.
4
Control panel
5
To Next Page
Loading...
