Olympus CF Q160AL/I - Channel Cleaning Brush; Channel-Opening Cleaning Brush

Chapter 3 Cleaning, Disinfection and Sterilization Procedures
19
EVIS EXERA GIF/CF/PCF TYPE 160 Series REPROCESSING MANUAL
 Channel cleaning brush (BW-17K, BW-20T)
The channel cleaning brush is used to brush the inside of the instrument/suction
channels and the holes in the air/water and suction valves (see Figure 3.8).
Figure 3.8
 Channel-opening cleaning brush (MH-507)
The channel-opening cleaning brush is used to brush the external surface of the
distal end of the endoscope, the suction cylinder and the instrument channel port
(see Figure 3.9).
Figure 3.9
Metal tip