Olympus CF Q160AL/I - Reusable Parts Reprocessing Procedures

58
Chapter 3 Cleaning, Disinfection and Sterilization Procedures
EVIS EXERA GIF/CF/PCF TYPE 160 Series REPROCESSING MANUAL
3.9 Cleaning, disinfection and sterilization
procedures for reusable parts and reprocessing
equipment
This section includes the cleaning, disinfection and sterilization procedures for
the reusable parts and reprocessing equipment listed below. For all other parts,
refer to their respective instruction manuals. For compatible reprocessing
methods, refer to Section 2.1, “Compatibility summary”.
Equipment needed
 Reusable parts which are normally reprocessed with the
endoscope
• Personal protective equipment
• Soft brush
• Large basin
• Detergent solution
• Clean water (for non-sterile water rinse)
• Clean, lint-free cloths
• Disinfectant solution
• Sterile water (for sterile water rinse)
• Sterile, lint-free cloths
• Small container
• 70% ethyl or isopropyl alcohol
•30cm
3
(30 ml) syringe
• Channel plug (MH-944)
• Injection tube (MH-946)
• Water-resistant cap (see Table 1.1)