Olympus DM-5 - Page 92

92
3
EN
Menu setting method
When you select [ Selected files ]:
1 Press the + or − button to select the
file you want to move or copy.
2 Press the `OK button to check the
file(s) selected.
When you select [ All files ]:
When all files are selected, all the files
in the folder will be automatically
selected and the recorder will move
to the [Folder to move] display.
Proceed to Step 8.
7 Press the F2 (GO) button.
8 Press the 9 , 0, + or −
button to select the folder you
want to move or copy the file to.
9 Press the ` OK button.
• [Moving!] or [Copying!] will appear
on the display and moving or copying
will start. During the process, the
progress status will be shown in
percentage. The process is completed
when [File move completed] or [File
copy completed
] is displayed.
Notes
• The recorder cannot copy when the
memory capacity is not sucient.
• The recorder cannot move or copy when
the number of le exceeds 999.
• Do not remove the battery during moving
or copying. This may damage the datas.
• A le cannot be moved or copied to the
same folder.
• When the operation is cancelled during
moving or copying, only the le that is
being moved or copied is eective, all
other les will become not eective.
• Files which are locked (
☞ P.75) will remain
so even after they are moved or copied.
• DRM les cannot be moved or copied.
• Files cannot be moved or copied directly
under the [Recorder] folder.
Menu setting method