60
9
Symptom
Cannot find the
recorded voice
The playback
speed does not
change
Can not connect
to the computer
using the cradle
Probable cause
Wrong folder.
The noise cancellation function is set at
“LOW” or “HIGH”.
The setting of the USB class is “AUDIO
CLASS”.
Action
Switch to the right folder.
Set the noise cancellation function to
“OFF” or return to normal playback
(☞ P.30).
Set the USB Class to “MASS
STORAGE” in the menu setting of this
recorder.
Troubleshooting
Troubleshooting
To Next Page
Loading...
