Olympus DS-2200 - Formatting the Card (FORMAT)

37
4
Formatting the Card (FORMAT)
1
Press and hold the MENU button
for 1 second or longer.
The menu opens (☞ P.39).
2
Press the FF or REW button until
“FORMAT” flashes on the display.
3
Press the PLAY button.
The formatting process is selected.
4
Press the FF or REW button to
choose “START”.
5
Press the PLAY button.
“DATA WILL BE CLEARED” appears for
approximately 2 seconds.
6
Press the FF or REW button again
to choose “START”.
Formatting prepares cards for recording. Cards that have been used on non-Olympus devices,
or that can’t be accessed by this unit, require formatting. The card that comes with this unit and
Olympus xD-Picture Cards are preformatted and can be used immediately following purchase.
2,4,6
3,5
1
2,4,6
3,5
Formatting the Card (FORMAT)