4
EN
1. Use your recorder
Getting Started
Charge the battery
Charge using the docking station
Plug the AC adapter into a household power outlet and connect
the power plug to the recorder via the docking station. Always
turn off the recorder before you connect power.
• The docking station and AC adapter are sold separately.
Charge using the USB cable
Verify that the recorder is in stop mode. Connect the USB cable
to the recorder.
Turn the power on
Move the POWER switch to ON position to activate the recorder.
Recording
¥ Press the
NEW
button to create a new file.
ø Move the slide switch to the
REC
position to start
recording.
π Move the slide switch to the
STOP
position to stop
recording.
To Next Page
Loading...
