27
Index Marks
Setting an Index Mark
1
Press the INDEX button during
recording or playback to set an
index mark.
An index number appears on the display.
Locating an Index Mark
1
Hold the FF/+ or REW/– button
while playing a file.
The recorder stops for 1 second when it
reaches the index mark.
Clearing an Index Mark
1
Locate the index mark you want to
clear.
2
Press the ERASE button while the
index number appears for
approximately 2 seconds on the
display.
The index mark is erased.
Index Marks
Index marks can be incorporated into a file during recording or playback to make it easy to locate
interesting information.
ERASE
00
M
51
S
INDEX 10
1
1
······················································································································································
Notes
• Up to 16 index marks can be set in a file. Attempting to set more index marks will cause “INDEX FULL” to
appear on the display.
• Index marks cannot be set or cleared in a locked file. (☞ P.26)
1
2
To Next Page
Loading...
