31
Backlight (BACKLIGHT)
The backlight for the recorder will be activated for approximately 10 seconds each time a button
is pressed. You can select whether or not you would like to use the backlight.
1
Press and hold the FOLDER/
MENU button for 1 second or
longer.
The menu opens. (☞ P.41)
2
Press the FF/+ or REW/– button
until “BACKLIGHT” flashes on the
display.
3
Press the REC/SET button.
The backlight setup process begins.
4
Press the FF/+ or REW/– button
to choose between ON and OFF.
ON : Backlight is enabled.
OFF: Backlight is disabled.
5
Press the REC/SET button to
complete the setup screen.
6
Press the STOP button to close the
menu.
Backlight (BACKLIGHT)
6
3,5
1
2,4
OFF
BACKLIGHT
ON
USB AUDIO
BACKLIGHT
BEEP
To Next Page
Loading...
