Troubleshooting
Symptom
Nothing
appears
on
the
display
Won't
start
Unable
to
record
No
playback
tone
heard
Unable
to
erase
Noise
heard
during
playback
Recording
level
too
low
Unable
to
set
index
marks,
tempmarks
Probable cause
The batteries are not loaded properly.
The batteries are dead.
The power is off.
The power is off.
The recorder is
in
HOLD mode.
The batteries are dead.
Low remaining internal memory.
The maximum number of files has
been reached.
The earphone is connected.
The VOLUME button is set to
O.
The file is locked.
The file is read-only.
The recorder was shaken during
recording.
The recorder was placed near a cell
phone or fluorescent lamp while
recording or during playback.
The microphone sensitivity is too low.
The maximum number of marks has
been reached.
The file is locked.
The file is read-only.
Action
Verify polarity is correct.
Replace with new batteries
(1lF
P.7).
Check another folder.
Unplug the earphones to use the
internal speaker.
Adjust the VOLUME button
(.r
P.19).
Unlock the file.
Cancel the read-only setting of the file
on the
PC.
Move the recorder.
Unlock the file.
Cancel the read-only setting of the file
on
the
PC.
37
To Next Page
Loading...
